KUHN AXIS 20.1, Руководство оператора

Страница: 16 / 216

User instructions 2
4
AXIS-GENERAL
2. 3 Depictions in the text
2.3.1 Directions and instructions
Steps that the operator must carry out are shown as a numbered list.
1. Instruction for action step 1
2. Instruction for action step 2
Directions involving a single step are not numbered. The same applies to actions
which do not have to be carried out in a particular sequence.
The following directions are preceded by a bullet point :

Handling instruction
2.3.2 Lists
Lists without a specific sequence are shown as lists with bullet points (level 1) and
dashes (level 2):

Property A
-
Point A
- Point B

Property B
2.3.3 References
References to other sections in the document are shown as paragraph number,
header text and page number:

Please note also chapter 3: Safety, page 5 .
References to other documents are made without mentioning the exact chapter
or page number:

Please also observe the instructions contained in the universal drive shaft
manual.