Subject to modifications
Menu operation
-
exit the menu with button 4 on the top right, you get back to the user interface
-
with the left turning knob
you reach the individual menu points,
-
the menu line currently chosen is highlighted in dark color and written bright on dark
-
if a setup screen or a “deeper” menu point is attached to the menu point, this is shown by means of a small arrow at
the end of the line; press button 6 to reach it.
Soft switch
A soft switch is a simple switching option within a menu point. If the menu point is connected to a soft switch,
you can change the setting by means of button 5.
Activate
button 5 for switching ON -
or
lock button 5
for switching OFF.
-
the current switching state is displayed in the corresponding menu line with small symbols.
-
for switched on - activated,
-
for switched off – locked.
Setup screens
In the setup screens, values can be modified in the currently valid areas. The setup screen page is built up in 3 columns.
Up to 3 values can be set per setup screen.
You reach the setup screens as follows:
-
The setup screen is built up
after pressing button 6 .
The values can be modified by means of the underlying turning knobs. The set values are saved immediately.
-
the left turning knob for the left value
-
the middle turning knob for the middle value and
-
the right turning knob for the right value
Exit the setup screen with button 4 .
Operating instructions 39
E
ngl
is
h
