manualshive.com logo in svg

Kugelmann Maschinenbau KS 1200, Руководство по эксплуатации, Страница: 10 / 79

Поделиться
Скачать
Kugelmann Maschinenbau KS 1200 Скачать руководство пользователя страница 10

//

 

ORIGINAL OPERATING INSTRUCTIONS

 

Operating instructions

27.06.2018

10/79

4.1

Target group

These operating instructions are intended for skilled persons who are responsible for
the following work at the sweeping suction combination:

•

Commissioning

•

Control system

•

Operation

•

Use

•

Maintenance

At least once a year, all personnel must be trained in the operation of the sweeping
suction combination in accordance with the guidelines of the business liability
insurance. The use of the sweeping suction combination by untrained or unauthorized
persons is prohibited.

4.2

Use

These operating instructions contain all necessary data and information for a secure
control, operation and maintenance of the sweeping suction combination.
Make sure that all persons responsible for operation or maintenance of the sweeping
suction combination or persons working in the immediate environment of the
machine are familiar with the operating and maintenance instructions as well as the
safety information in this manual.
These operating instructions are part of the product and have to be kept in a safe
place. In case of resale or transfer of the machine to third parties, these operating
instructions have to be included.
All information, illustrations and technical data correspond to the technical state at
the time of printing. Subject to technical modifications.

Содержание KS 1200
















































































Отзывы:

Нет отзывов