23
PERIODIC SERVICE
EN
GLISH
4. If the oil level is too low, remove the oil filler plug, and
add new oil to the prescribed level.
5. After adding oil, wait more than 5 minutes and check
the oil level again. It takes some time for the oil to drain
down to the oil pan.
A
Engine oil should have properties of API classification
SL or higher.
A
Change the type of engine oil according to the
ambient temperature.
A
When using oil of different brands from the previous
one, be sure to drain all the previous oil before adding
the new engine oil.
B
Changing engine oil
To avoid personal injury or death:
A
Be sure to stop the engine before
draining engine oil.
A
When draining engine oil, place
some container underneath the
engine and dispose it according to
local regulations.
A
Do not drain oil after running the
engine. Allow engine to cool down
sufficiently.
1. Change oil after the initial 50 hours of operation and
every 200 hours thereafter [WG1605-E3, WG1903-
E3, WG2503-E3] or every 400 hours thereafter
[WG3800-E3].
2. Remove the drain plug at the bottom of the engine,
and drain all the old oil. Drain oil will drain easier when
the oil is warm.
[WG1605-G-E3 / WG1605-L-E3 / WG1605-GL-E3 /
WG1605-N-E3 / WG1605-LN-E3]
[WG1903-G-E3 / WG1903-L-E3 / WG1903-GL-E3 /
WG1903-N-E3 / WG1903-LN-E3 /
WG2503-G-E3 / WG2503-L-E3 / WG2503-GL-E3 /
WG2503-N-E3 / WG2503-LN-E3]
Models
Engine oil quantity
WG1605-G-E3
WG1605-L-E3
WG1605-GL-E3
WG1605-N-E3
WG1605-LN-E3
6.0 L
(1.59 U.S.gals.)
WG1903-G-E3
WG1903-L-E3
WG1903-GL-E3
WG1903-N-E3
WG1903-LN-E3
7.0 L
(1.85 U.S.gals.)
WG2503-G-E3
WG2503-L-E3
WG2503-GL-E3
WG2503-N-E3
WG2503-LN-E3
9.5 L
(2.51 U.S.gals.)
WG3800-G-E3
WG3800-L-E3
WG3800-GL-E3
WG3800-N-E3
WG3800-LN-E3
12.2 L
(3.22 U.S.gals.)
Above 25 C (77 F)
SAE30 or SAE10W-30
SAE15W-40
0 C to 25 C (32 F to 77 F)
SAE20 or SAE10W-30
0 C to -20 C (32 F to -4 F)
SAE10W or SAE10W-30
Below -20 C (-4 F)
SAE5W-30
(1) Oil drain plug
(1) Oil drain plug
EG523-8917_E.book Page 23 Friday, May 17, 2019 10:32 AM