Kubota U50-5, Руководство по эксплуатации

Страница: 87 / 236

Operation
W9272-8135-1
85
05/2020
Radiator and A/C condenser - check

Visually inspect the coolant radiator (1), fuel cooler (2), hydrau-
lic oil cooler (3) and condenser (4) for leaks and accumulation
of dirt and debris.
Radiator - clean
If there is any dirt or debris an the radiators or condenser:

Clean the radiator from the engine side with a water jet or com-
pressed air. Do not use high-pressure cleaners.

Particular care must be devoted to the space between the radi-
ators, because foliage often collect at this point.
After cleaning, inspect the radiators for damage.
V-belt - check
Air conditioner V-belt (optional)

Press in the V-belt (1) at position "A".
The V-belt must give way by approx. 12 to 15 mm (pressure: 7 kg).
Adjust the V-belts if necessary (page 185).
Fan/Alternator V-belt

Press in the V-belt (2) at position "B".
The V-belt must give way by approx. 7 to 9 mm (pressure: 7 kg).
Adjust the V-belts if necessary (page 185).

Check both V-belts for wear and tear. Replace the V-belts if
necessary (page 185).
Do not touch the hot radiators: risk of burning.
The engine must be switched off and the key removed!
Do not attempt to grasp rotating or moving parts.
STOP
4 4
1 1
2 2
3 3
1
A
STOP
2
B