Kubota U35-4, Руководство оператора, Страница: 92 / 120

REGULAR CHECKS AND MAINTENANCE WORK 70
EVERY 250 SERVICE HOURS
Do all 50 hour servicing at the same time.
B
Changing Engine Oil (First Engine Oil
Change after 50 Service Hours)
To avoid personal injury or death:
A
First stop the engine then remove the key and
wait long enough for the oil to cool down.
1. Remove the drain plug on the underside of the engine
and drain all oil.
2. Re-tighten the drain plug.
3. Fill up with new oil through the filling port to the
specified level.
4. Let the engine idle for approx. 5 min. Check the engine
oil level. To check the engine oil level, insert the
engine oil dipstick completely into the respective port
opening and pull out again. If the oil level lies between
both markings, no oil must be added.
A Regardless of the service hours, an engine oil change
is due every 1 year.
B
Replacing Engine Oil Filter Cartridge
(First Engine Oil Filter Change after 50
Service Hours)
1. Replace the oil filter cartridge at the same time as
doing the engine oil change.
2. Remove the cartridge with the supplied filter wrench.
3. Oil the O-ring of the new oil filter cartridge lightly. Then
tighten the oil filter cartridge by hand.
4. Fill engine oil to the specified level.
5. Let the engine run for approx. 5 min. and make sure
that the engine oil indicator lamp does not light up.
Then stop the engine and remove the key.
6. The engine oil level is reduced by the amount of the
filter capacity after the engine is started. It is usually
necessary to add oil.
A
Always check the oil level after having exchanged the
filter.
(1) Drain plug
(1) Engine oil dipstick
(2) Oil filling port (A) Required oil level range
Engine oil volumes
(with engine oil filter)
5.3 L
(1) Oil filter cartridge