Kubota RTV520 Скачать руководство пользователя страница 56

Страница: 56 / 96

PERIODIC SERVICE

WARNING

To avoid serious injury or death:

• Do not work under any hydraulically supported

devices. They can settle, suddenly leak down,
or be accidentally lowered. If necessary to
work under vehicle or any vehicle elements for
servicing or adjustment, securely support them
with stands or suitable blocking beforehand.

HOW TO OPEN THE HOOD AND

TILT THE SEAT

WARNING

To avoid serious injury or death from contact with
moving parts:

• Never open the operator's seat while the engine

is running.

1. Hood

1. To open the hood, pull up the latch lever to release

the latch and open the hood.

2. Push the support link into the hole to lock when the

hood is fully raised.

(1) Latch lever
(2) Hood

(A) “RELEASE”

3. To close the hood, hold the hood and lift it up

slightly and pull the support link to unlock.

4. Put the support link into the support holder.
5. Press-fit the hood into position with both hands.

(1) Support link
(2) Hole

(A) “HOLD”
(B) “PUSH” (Lock)
(C) “PULL” (Unlock)

(1) Support holder

PERIODIC SERVICE

HOW TO OPEN THE HOOD AND TILT THE SEAT

RTV520

Содержание RTV520

































































































Результаты поиска

Содержание RTV520

Отзывы:

Похожие инструкции для RTV520

Бренды по названию

Популярные бренды

Kubota RTV520, Руководство оператора

Результаты поиска

Содержание RTV520

Отзывы:

Похожие инструкции для RTV520

Бренды по названию

Популярные бренды