Kubota RTV-X900G, Руководство оператора

Страница: 46 / 126

OPERATING THE VEHICLE 24
ENGLISH
10. Set the bracket to the height which you want to.
At this vehicle, seat can be set as below 3 modes.
(N) Normal height
(L) Low height
(H) High height
At Normal height, use center hole.
At Low height, use highest hole.
At High height, use lowest hole.
After changing seat height, set the front snap pin.
11. Finally, confirm that seat attached height of front and
rear is right.
At Normal height use center hole at front and rear.
At Low height, use highest hole at front and lowest
hole at rear.
At High height, use lowest hole at front and highest
hole at rear.
B
Seat Belt
To avoid serious injury:
A
Seat belts reduce injury. Always wear your seat
belts. The lap-style seat belts may not provide
adequate protection for small children. Special
care is recommended when carrying a child
passenger.
Where appropriate, use a child safety seat.
To avoid serious injury:
A
Always use the seat belts when operating and
riding in the vehicle.
Adjust the seat belts for proper fit and connect the buckle.
Seat belt is an auto-locking retractable type.
(N) Normal height
(L) Low height
(H) High height
(1) Pin
(2) Snap pin (front)
2. Fasten the seat belt.
(1) Seat belt