Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 94 / 436

2. Implement limitation tables
IMPORTANT
The KUBOTA tractor has been thoroughly tested for proper performance with implements sold or approved
by KUBOTA.
Do not use the following implements:
• Implements which are not sold or approved by KUBOTA
• Implements which exceed the maximum specifications listed in the following table
• Implements which are otherwise unfit for use with the KUBOTA tractor
These implements may result in malfunctions or failures of the tractor, damage to other property, and injury
to the operator or others.
NOTE
Any malfunctions or failures of the tractor resulting from use with improper implements are not covered by
the warranty.
Model BX1880, BX2380, and BX2680
Tread (max. width)
Front 930 mm (36.6 in.)
Rear 820 mm (32.2 in.)
Lower link end max. lifting weight W
0
550 kg (1210 lbs.)
Actual figures
Implement weight W
1
and / or size As in “Implement weight list”
Max. hitch load W
2
250 kg (550 lbs.)
Trailer loading weight W
3
(Max. capacity) 800 kg (1765 lbs.)
Total weight W
4
1100 kg (2425 lbs.)
Lower link end max. lifting weight W
0
The max. allowable load which can be put on the lower link end
Implement weight W
1
The implement's weight which can be put on the lower link
Max. hitch load W
2
The max. loading weight for hitching
Trailer loading weight W
3
The max. loading weight for trailer (without trailer's weight)
Total weight W
4
The max. loading weight for trailer with trailer's weight
NOTE
• Implement size may vary depending on soil operating conditions.
• Strictly follow the instructions outlined in the operator's manual of the mounted or trailed machinery or
trailer, and do not operate the combination tractor-machine or tractor-trailer unless all instructions have
been followed.
• When you use the forestry application, there are following hazards:
– Toppling trees, primarily in case a rear mounted tree grab crane is mounted at the rear of the tractor
– Penetrating objects in the operator's enclosure, primarily in case a winch is mounted at the rear of the
tractor
To deal with these hazards and other related hazards, the tractor requires optional equipment such as
operator protective structure (OPS), falling object protective structure (FOPS), and so on. The optional
equipment, however, is not available for this tractor. Without the optional equipment such as OPS and
FOPS, the use of the tractor is limited to tractor specific applications like transport and stationary work.
2. GENERAL
IMPLEMENT LIMITATIONS
2. Implement limitation tables
2-52
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A