2.1.7 Greasing front and rear anti-scalp
rollers
1. Grease the grease fitting (1), (2) of the front and
rear anti-scalp rollers if the amount of grease is
insufficient.
(1) Grease fitting (Front anti-
scalp roller)
(2) Grease fitting (Rear anti-
scalp roller)
[A] RCK60B-23BX and
RCK54-23BX
[B] RCK60D-26BX and
RCK54P-26BX
2.1.8 Greasing universal joint
1. Grease the internal splines (1) and grease fittings
(2) of the universal joint if the amount of grease is
insufficient.
(1) Spline
(2) Grease fitting
[RCK60D-26BX and RCK54D-26BX only]
2. Grease between the hole and rod (3).
(3) Hole and rod
2.2 Check points of initial 50 hours
2.2.1 Changing gear box oil
CAUTION
• Be sure to stop the engine and remove the key
before changing the oil.
IMPORTANT
• Use the specified gear oil.
1. Dismount the mower from the tractor, and place the
mower on level ground.
2. Remove the oil filler plug (2).
CHECK AND MAINTENANCE
2. Mower
2. GENERAL
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
2-45
KiSC issued 03, 2019 A
Содержание ,RCK60B-23BX
