[Only for RCK54D-26BX]
2. Remove the ramp bracket (5) for greasing spindle
shafts. To remove the ramp bracket (5), remove the
pin (6) and clevis pin (4) and slide the ramp bracket
(5) to rear side. Then lift up the ramp bracket to
remove from mower deck.
(1) Grease fitting (Spindle shaft)
(2) Grease fitting (Belt tension
pulley)
(3) Grease fitting (Belt tension
pivot)
(4) Clevis pin
(5) Ramp bracket
(6) Pin
(A) Rear
(B) Up
[A] RCK60B-23BX and
RCK54-23BX
[B] RCK60D-26BX and
RCK54P-26BX
2.1.6 Greasing balance shaft
RCK60B-23BX
1. Grease the grease fitting (1) of the balance shaft if
the amount of grease is insufficient.
(1) Grease fitting
2. GENERAL
CHECK AND MAINTENANCE
2. Mower
2-44
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A
Содержание ,RCK60B-23BX
