Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 84 / 436

1.15.3 Replacing light bulb
Light Capacity
Head light 37.5 W × 2
Tail light 12.8 W × 2
Hazard light 27 W × 2
Head light
1. Take the light bulb out of the body of the light and
replace with a new one.
Other lights
1. Detach the lens and replace the light bulb.
2. Mower
2.1 Check points of daily or each use
2.1.1 Retightening mower blade screw
NOTE
• To avoid injury, always handle the mower blade
with care.
(1) Wooden block
(2) Mower blade screw (A) Loosen (Counterclockwise)
(B) Tighten (Clockwise)
1. Tilt up the mower and turn it over to expose the
mower blades.
2. Wedge a wooden block (1) securely between the
mower blade and mower deck.
3. Retighten the mower blade screw to the specified
torque.
RCK60B-23BX, RCK54-23BX, and RCK48-18BX
Tightening tor-
que Mower blade
screw
98.0 to 117.6 N
⋅
m
10.0 to 12.0 kgf
⋅
m
72.0 to 86.8 lbf ⋅ ft
RCK54D-26BX and RCK60D-26BX
Tightening tor-
que Mower blade
screw
102.9 to 117.6 N ⋅ m
10.5 to 12.0 kgf
⋅
m
75.9 to 86.8 lbf ⋅ ft
4. If the mower blade screw (2) is worn or broken,
replace it.
2.1.2 Checking mower blade
WARNING
To avoid serious injury or death:
• Be sure to stop the engine and remove the key.
• Blades may be sharp. When you handle blades,
wear heavy gloves or wrap end of blade with a
rag.
IMPORTANT
• Use the proper metric size box or socket
wrench to tighten or loosen the blade mounting
bolt.
NOTE
• Before checking or replacing the blade, wipe
grass and mud off the top and inside of the
mower.
• Especially clean up the inside of the belt cover,
because otherwise the belt life will be reduced.
1. The blade cutting edges must be kept sharp at all
times. Sharpen the cutting edges, if they resemble
blade (B). Replace the blades if they appear similar
to blade (C).
(A) New blade
(B) Worn blade (C) Cracked blade
2. GENERAL
CHECK AND MAINTENANCE
1. Periodic service
2-42
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A