1. Remove the timer relay (1).
(1) Timer relay
2. Connect jumper leads across the battery positive
terminal and the timer relay terminal 3, and across
the battery positive terminal and the timer relay
terminal 4.
3. Connect jumper leads across the battery negative
terminal and the timer relay terminal 2, and across
the battery negative terminal and the bulb terminal.
4. Connect jumper lead across the timer relay terminal
1 and the bulb terminal.
5. If the bulb lights up when disconnecting a jumper
lead from the terminal 3 and goes off 6 to 13
seconds late, the timer relay is proper.
4.10 Charging system
4.10.1 Checking battery charging current
NOTE
• Connect an ammeter only after starting the
engine.
• When the electrical loads is considerably low or
the battery is fully charged, the specified
reading may not be obtained.
Current
Factory specifi-
cation
14 to 15 A
Voltage
14 to 15 V
Alternator speed
5200 min
-1
(rpm)
1. After starting the engine, disconnect the battery
positive cord (+), and connect an ammeter and
voltmeter. Then switch on all electrical loads (such
as head lights) and measure the charging current.
(1) Battery positive cord
4.11 Combination switch
4.11.1 Removing combination switch
(1) Combination switch
1. Remove the under panel, and disconnect the
combination switch connector.
2. Remove the combination switch (1).
4.11.2 Checking combination switch
connector voltage
1. Measure the voltage with a voltmeter across the
connector 2 terminal and chassis when the main
switch is in the
ON
position.
8. ELECTRICAL SYSTEM
SERVICING
4. Checking and adjusting
8-38
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
KiSC issued 03, 2019 A
Содержание ,RCK60B-23BX
