Kubota ,RCK60B-23BX, Руководство по ремонту

Страница: 101 / 436

A 200 mm (7.87 in.)
B 30 mm (1.18 in.)
C 20 mm (0.79 in.)
D 15 mm (0.59 in.)
E 8 mm (0.31 in.)
F 10 mm dia. (0.39 in. dia.)
1.9 Crankshaft bearing 1 replacing
tool
Use to press out and press fit the crankshaft bearing 1.
NOTE
• The special tools are not provided, so make
them referring to the figure.
[Press out]
D902-E4 D1005-E4
A 135 mm (5.31 in.)
B 72 mm (2.8 in.)
C 40 mm radius (1.6 in. radius)
D 10 mm dia. (0.39 in. dia.)
E 22 mm (0.87 in.) 24 mm (0.94 in.)
F 20 mm dia. (0.79 in. dia.)
G
47.90 to 47.95 mm dia.
(1.886 to 1.887 in. dia.) 51.20 to 51.40 mm dia.
(2.016 to 2.023 in. dia.)
H
43.90 to 43.95 mm dia.
(1.729 to 1.730 in. dia.) 47.30 to 47.50 mm dia.
(1.863 to 1.870 in. dia.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.30 mm (0.012 in.)
[Press fit]
D902-E4 D1005-E4
A 130 mm (5.12 in.)
B 72 mm (2.83 in.)
C 40 mm radius (1.6 in. radius)
D 9.0 mm (0.35 in.)
E 24 mm (0.94 in.)
F 20 mm dia. (0.79 in. dia.)
G 68 mm dia. (2.7 in. dia.)
H
43.90 to 43.95 mm dia.
(1.729 to 1.730 in. dia.) 47.30 to 47.50 mm dia.
(1.863 to 1.870 in. dia.)
C1 Chamfer 1.0 mm (0.039 in.)
C2 Chamfer 2.0 mm (0.079 in.)
C0.3 Chamfer 0.30 mm (0.012 in.)
1.10 Governor gear holder busing
replacing tool
Use to press out and press fit the governor gear holder
bushing.
D1005-E4
NOTE
• The special tools are not provided, so make
them referring to the figure.
SPECIAL TOOLS
1. Special tools for engine 2. GENERAL
BX1880,BX2380,BX2680,RCK60B-23BX,RCK54-23BX,RCK48-18BX,RCK60D-26BX,RCK54D-26BX
2-59
KiSC issued 03, 2019 A