background image

3. To  close  the  cabin  door,  push  the  release  lever

down and close the cabin door.

(1) Door knob (outside)
(2) Release lever
(3) Release button

(4) Door knob (inside)

4. When  leaving  the  wheel  loader,  always  lock  the

cabin door.

5. Opening and closing the side

cabin window [Cabin type only]

1. Press the release button and pull the grip to unlock

the side cabin window.

(1) Release button
(2) Grip
(3) Release lever

(A) Pull

2. Push side cabin window by release lever to open.

(1) Side cabin window

3. To  close  the  side  cabin  window,  pull  it  by  the

release  lever  until  the  lock  snaps  in  at  the  window
frame.

6. Emergency hammer [Cabin type

only]

Emergency hammer is for breaking the window pane to
escape  from  wheel  loader  if  the  window-rail-locking
mechanism should fail.

 WARNING

To avoid personal injury or death:

• When  breaking  the  window  pane,  close  your

eyes and cover them with an arm.

(1) Emergency hammer

 CHECKS BEFORE STARTING THE MACHINE

CABIN TYPE MACHINE

48

R540

Содержание R540



















































































































































Отзывы:

Похожие инструкции для R540