Kubota R540, Руководство оператора

Страница: 103 / 146

• To prevent accumulations of condensed water
in the fuel tank, fill the fuel into the fuel tank
before parking overnight.
1. Turn the starter switch to the [RUN] position.
2. Check the fuel level by the fuel gauge.
(1) Fuel gauge (A) Full
(B) Empty
3. Add the fuel if necessary.
a. Open the cover.
b. Remove the fuel-tank-cap.
c. Fill the fuel tank.
(1) Key hole
(2) Cover (3) Fuel tank cap
Fuel tank capacity 70 L
IMPORTANT :
• Avoid fuel spills and overfilling the fuel tank.
• Every time after operation is over, fill the fuel
tank fully. Be sure to replace the fuel-tank-
cap and tighten it up, and lock the cover.
• To open the fuel cap, keep the key inserted.
(1) Starter key
(2) Fuel tank cap (3) Tank cap cover
4. Checking and replenishing the
coolant
WARNING
To avoid personal injury or death:
• Do not remove the radiator cap while the
coolant is hot. When the coolant is cool, rotate
the radiator cap to the first stop to allow
excessive pressure to escape. Then remove the
radiator cap completely.
The radiator is equipped with a recovery tank. When
the coolant level in the radiator drops, coolant is added
automatically from the recovery tank. It is necessary to
check the water level in the recovery tank and refill
coolant if necessary.
1. Check the coolant level in the recovery tank.
Do not disconnect the hose but remove the radiator
cap.
If the coolant level is between the
[FULL] and the
[LOW] marks, the condition is normal.
DAILY CHECK PERIODIC SERVICE
R540
99