Kubota R430, Руководство оператора

Страница: 53 / 112

• Choose flat and level ground for parking the
machine. It is important to lower the bucket to
the ground.
If you must park the machine on a slope, be
sure to block the tires securely.
• When dismounting the machine, set the parking
brake, stop the engine, lower the bucket and
attachment to the ground, release the hydraulic
pressure in the hydraulic system by operating
control levers, lock all control levers in neutral,
and remove the starter key.
1. Remove foot from the accelerator pedal.
2. Depress the brake pedal and stop the machine.
3. Set the parking brake.
4. Stop the engine.
5. Lower the bucket and attachment to the ground.
6. Release the hydraulic pressure in the hydraulic
system.
7. Lock all control levers in neutral.
8. Remove the starter key.
(A) Block the tires
OPERATION OF THE LIFT ARM
AND THE BUCKET
1. Control lever
The control lever controls all the bucket and lift arm
operations.
WARNING
To avoid personal injury or death:
• Do not exceed the rated operating capacity of
the unit. If loads exceed the rated operating
capacity, the unit can experience a hydraulic
imbalance when half or medium “lift-arms-
raise” command and “bucket-roll-back” or
“auxiliary-hydraulic-control”
command are
input together, which can result in the lift arms
lowering slowly. If you begin to experience the
hydraulic imbalance, either place the lift arms
control in “NEUTRAL” or input full “RAISE”
control, and lift arms lowering will cease.
(A) Raise the lift arm
(B) Lower the lift arm
(C) Float the lift arm
(D) Dump the bucket
(E) Roll back the bucket (F) Neutral
(G) Roll back
(H) Dump
(I)
Raise
(J) Lower
NOTE :
• To stop the operation of lift arm and bucket,
return the control lever to the neutral position.
2. Auto leveler (option)
When the bucket is the dump position, tilt the control
lever to the left. The control lever is held at the roll back
position and the bucket is rolled back.
After the control lever back to the neutral position
automatically, lower the lift arm. Then the bucket
grounds horizontally.
OPERATION OF THE LIFT ARM AND THE BUCKET OPERATION OF THE MACHINE
R430
49