Kubota M7040SU, Руководство оператора

Страница: 61 / 90

43 TIRES, WHEELS AND BALLAST
BALLAST
To avoid personal injury:
A
Additional ballast will be needed for
transporting heavy implements. When the
implement is raised, drive slowly over rough
ground, regardless of how much ballast is
used.
A
Do not fill the front wheels with liquid to
maintain steering control.
B
Front Ballast
Add weights if needed for stability (2WD. 4WD models)
and improve traction (4WD model). Heavy pulling and
heavy rear mounted implements tend to lift front wheels.
Add enough ballast to maintain steering control and
prevent tip over. Remove weight when no longer needed.
C
Front End Weights (option)
The front end weights can be attached to the bumper.
See your implement operator's manual for required
number of weights or consult your local KUBOTA Dealer
to use.
A
Do not overload tires.
A Add no more weight than indicated in chart.
A Do not attach the front bumper when the front loader
is attached.
B
Rear Ballast
Add weight to rear wheels if needed to improve traction or
for stability. The amount of rear ballast should be matched
to job and the ballast should be removed when it is not
needed.
The weight should be added to the tractor in the form of
liquid ballast, rear wheel weights or a combination of both.
C
Cast Iron Disk (option)
The cast iron rear wheel disk may be utilized to provide
additional rear weight.
C
Rear Wheel Weights (option)
The rear wheel weights can be attached to the rear wheel.
See your implement operator's manual for required
number of weights or consult your local KUBOTA Dealer
to use.
A
Do not overload tires.
A Add no more weight than indicated in chart.
(1) Front end weights
(2) Bumper
Maximum weight
47 kg x 8 pieces
(830 lbs.)
Tire size Cast Iron Disk
16.9-30
158 kg x 2 Pieces
(700 lbs.)
(1) Rear wheel weights
Rear wheel weight
73 kg x 2 pieces
(320 lbs.)