Kubota M7-132, Руководство оператора

Страница: 289 / 332

2. If the hoses and clamps are found to be worn or
damaged, replace or repair them at once.
(1) Fuel lines
(2) Clamp bands
(1) Fuel lines
(2) Clamp bands
(3) Fuel cooler
NOTE :
• If the fuel line has been replaced, be sure to
properly bleed the fuel system.
(See Bleeding the fuel system on page 294.)
10. Checking intake air line
1. Check to see that hoses and hose clamps are tight
and not damaged.
2. If the hoses and clamps are found to be worn or
damaged, replace or repair them at once.
(1) Hose
(2) Hose clamps
11. Checking brake hose
Consult your local KUBOTA Dealer for this service.
12. Checking differential lock hose
1. Check to see that hoses and hose clamps are tight
and not damaged.
2. If hoses and clamps are found worn or damaged,
replace or repair them at once.
(1) Front differential lock hose
(2) Hose clamps
13. Checking lift cylinder hose
1. Check to see that hoses and hose clamps are tight
and not damaged.
EVERY 500 HOURS PERIODIC SERVICE
M7132, M7152, M7172
283