Kubota M7-132, Руководство оператора

Страница: 252 / 332

2. ISOBUS socket (Premium and
Premium KVT model only)
When an implement conforming to the ISO Standard
11783 guidelines is connected, various implement
settings can be made through the K-monitor.
This means there is no need to add any controller and
another monitor for the implement in question in the
cabin.
Example: when equipped with a travelling speed-
interlocked fertilizer applicator:
The K-monitor serves to enter the type of fertilizer,
fertilizer application rate per area and other information.
Once the operation gets started, the implement adjusts
itself for spray volume in response to the travelling
speed and improves the performance.
What’s more, the optional GPS function may be used
together to navigate the tractor’s travelling route. In
doing so, uneven and redundant spraying can be
prevented.
Read the operator’s manual provided by the implement
manufacturer and observe all safety messages in the
manual and on the implement prior to use.
(1) ISOBUS socket (A) “PUSH”
3. Electrical power socket
(1) 3-terminal accessory power
socket
(A) Terminal: through the ACC
position of the key switch
(15 A)
(B) Terminal: through the battery
direct (30 A)
(C) Terminal: ground
Electrical power socket
(1) Electrical power socket (25 A)
Loader electrical power socket
(1) Electric connector for loader control device
CAB OPERATION ACCESSORIES
246
M7132, M7152, M7172