Kubota M7-132, Руководство оператора

Страница: 154 / 332

(1) Heater mirror switch
9. Remote control mirror (if
equipped)
WARNING
To avoid personal injury or death:
• Adjustment while driving is extremely
dangerous.
Stop the tractor before adjusting the mirrors.
The angle of the left and right rear view mirrors can be
adjusted while sitting in the driver’s seat.
For confirmation of implements and corps inside the
field, rear view while driving on the road, etc, angle
adjustment can be done with a single touch as needed.
Adjustment Method
1. Set the key switch to “ON” or “ACC” position
2. Use the adjustment knob to adjust the mirror.
3. Adjust the angle of the mirror by tilting the
adjustment knob up, down, left or right.
4. Return the adjustment knob to the centre position
after the adjustment is completed.
(1) Adjustment knob
(2) Upper right mirror adjustment position
(3) Upper left mirror adjustment position
(4) Lower right mirror adjustment position
(5) Lower left mirror adjustment position
IMPORTANT :
• Do not hold the mirror with your hand while
adjusting.
LIGHT CONTROLS
1. Lights
Turn on the repeat headlight only when an implement
using the front 3-point hitch obstructs the beam of the
headlight.
(1) Headlight
(2) Repeat headlight (if equipped)
(3) Position light
(4) Direction indicator and hazard light
(5) Work light (if equipped)
(1) Direction indicator and hazard light
(2) Stop light and position light
(3) Rear registration plate light
(4) Work light (if equipped)
1.1 Light switch (without repeat headlight
type)
1. Turn the key to the “ON” position.
2. In accordance with the switch positions, the lights in
the following table light up.
OPERATING THE TRACTOR OPERATOR’S POSITION CONTROLS
148
M7132, M7152, M7172