Kubota M108DC, Руководство оператора

Страница: 72 / 124

TIRES, WHEELS AND BALLAST 52
B
Rear Wheels
Rear tread width can be adjusted as shown with the
standard equipped tires.
To change the tread width
1. Remove the wheel rim and / or disk mounting bolts.
2. Change the position of the rim and / or disk (right and
left) to the desired position, and tighten the bolts.
A
Always attach tires as shown in the drawings.
A
If not attached as illustrated, transmission parts may
be damaged.
A
When re-fitting or adjusting a wheel, tighten the bolts
to the following torques then recheck after driving the
tractor 200m (200yards) and thereafter according to
service interval.
(See "MAINTENANCE" section.)
(1) 260 to 304 N-m (26.5 to 31.0 kgf-m)
(2) 343 to 401 N-m (35.0 to 41.0 kgf-m)