Kubota LA535, Руководство оператора

Страница: 40 / 59

• Check all bolts and nuts frequently and keep
them tight.
Check the bolts and nuts of the main frame regularly,
especially when they are new.
If the bolts and nuts of the main frame are loosen,
tighten them as follows.
(1) Main frame
Bolt torque (2) (4)
124 to 147 N
⋅
m
(12.6 to 15.0 kgf ⋅ m)
(91.5 to 108.4 lbf
⋅
ft)
Bolt torque (3)
80.0 to 90.0 N ⋅ m
(8.2 to 9.2 kgf
⋅
m)
(59.0 to 66.4 lbf ⋅ ft)
(1) Main frame connector
Bolt torque (2)
124 to 147 N ⋅ m
(12.6 to 15.0 kgf
⋅
m)
(91.5 to 108.4 lbf
⋅
ft)
2. Re-tightening the torque of
hardwares of Mechanical self
leveling [if equipped]
Check the bolts and nuts of Mechanical self leveling
regularly, especially when they are new. If the bolts and
nuts of Mechanical Self leveling are loosen, tighten
them as follows.
Bolt torque (1) (2) (3)
260 to 304 N
⋅
m
(26.5 to 31.0 kgf ⋅ m)
(192 to 224 lbf
⋅
ft)
3. Checking the movement of the
lifting stand [if equipped]
1. Check the lifting stand linkage for dirt or debris and
ensure the linkage rotates freely.
If the linkage does not rotate freely clean the
linkage as needed.
2. Check the height of the lifting stand.
If the stand does not hook and fold up successfully,
readjust the height of the lifting stand according to
the instructions provided in Adjusting the swift-tach
stand on page 47.
MAINTENANCE SERVICE EVERY 50 HOURS
36
LA535