Kubota LA535 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 59

background image

2. Install the hydraulic quick coupler as required.

(1) Front hydraulic outlet
(2) Hydraulic quick coupler (Not

included in this kit)

(A) Port A
(B) Port B

2. Operating the control switch

WARNING

To avoid personal injury or death:

• Valve lock does not lock out the switch-

operated third-function hydraulics, which are
active when the key switch and the front
hydraulic valve main switch are on.

1. Push the front hydraulic valve main switch (1) to

engage the front hydraulic valve.
A light on the front hydraulic valve main switch will
illuminate to indicate that the front hydraulic valve is
on and the activation switch (2) is enabled.

2. Press the activation switch as follows.

• When pressing the activation switch-A,

hydraulic oil will come out of the port-A and
return through the port-B as long as the
activation switch is pressed.

• When pressing the activation switch-B,

hydraulic oil will come out of the port-B and
return through the port-A as long as the
activation switch is pressed.

3. Push the front hydraulic valve main switch again to

disengage the front hydraulic valve.
The front hydraulic valve main switch light will turn
off.

(1) Front hydraulic valve main

switch

(2) Activation switch
(3) Activation switch A
(4) Activation switch B

(X) Front hydraulic valve main

switch is off

(Y) Front hydraulic valve main

switch is on

IMPORTANT :

• While using a front mounted hydraulic

attachment, make sure that the hydraulic
hose is routed to avoid contact with the left
and right bucket links. Keep the hydraulic
hose out of the circled zone in the following
figure.

FRONT REMOTE HYDRAULIC CONTROL SYSTEM (IF EQUIPPED)

OPERATING THE LOADER

LA535

29

«
...
31
32
33
34
35
...
»

Содержание LA535




























































Отзывы:

Нет отзывов

Похожие инструкции для LA535

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды