49
ASSEMBLY INSTRUCTIONS
3. Attach the tube guard in place.
4. Attach the accumulator valve cover in place.
5. Apply the selector lever to the accumulator valve.
A
Secure the selector lever with the lock nut.
B
Accumulator [M7993] (if equipped)
C
Accumulator section [self-leveling valve only]
A
If the machine is equipped with the optional self-level
valve, fit the accompanying orifice to the accumulator
assembly (RH) in the following procedure.
A
If the machine does not have a self leveling valve, the
orifice is not needed.
1. Remove the adapter from the accumulator valve.
2. Set the orifice into the port.
(1) Tube guard
(2) 2-M18 x 35 bolts
2-M18 spring lock washers
(1) Accumulator valve cover
(2) 2-M8 x 20 bolts with washer
(1) Selector lever
(2) M8 lock nut
(1) Accumulator assy (RH)
(2) Adapter assy
(1) Port