Kubota L47TL, Руководство оператора

Страница: 75 / 159

49 OPERATING THE TRACTOR
CHECK DURING DRIVING
B
IntelliPanel(TM) Message
If any of the following messages appear during operation,
immediately stop the machine and follow the message's
instructions. If the cause of trouble has not been
pinpointed, consult your local KUBOTA Dealer.
C
Engine over heat
If the engine gets overheated, the following message
appears.
1. Stop operation and set the engine to the idling speed.
2. When the coolant temperature has dropped, the
following message appears instead.
3. Stop the engine, wait for 30 minutes until the machine
cools down, and check the following points.
(1) Check the reserve tank and radiator for cooling
water shortage or leak.
(2) Check the insect screening and radiator for chaff
and dust deposits.
(3) Check the fan belt for slack.
A If steam gushes out of the reserve tank's overflow
pipe, take the measure discussed above.
C SERVICE INSPECT
1. The service inspect indicator shows up when the time
for an engine oil change has come. Change the engine
oil with fresh one.
(See "Changing Engine Oil" in "EVERY 400 HOURS"
in "PERIODIC SERVICE" section.)
2. After an engine oil change, reset the engine oil hour
display to zero on the Maintenance Log screen in
service inspect mode. The service inspect indicator
goes out.
(See "SERVICE INSPECT mode displaying/resetting
procedure" in "INTELLIPANEL(TM)" in "OPERATING
THE TRACTOR" section.)
B Immediately Stop the Engine if:
A
The engine suddenly slows down or accelerates.
A
Unusual noises are suddenly heard.
A
Exhaust fumes suddenly become very dark.
4. With such item selected, hold down the Display
mode button, and the hours are reset to zero.
5. Press the Display mode button to highlight "back"
and hold down the Display mode button to get back
to the display (A).
(1) Service inspect indicator