Maintenance
126
Checking, Adjusting and Changing the V-Belt
Adjusting the V-Belt
!
Open the engine compartment cover (page 107).
!
Check the V-belt (page 126).
!
Remove the mounting screws (2).
!
Tighten the V-belts by adjusting the tension roller (1).
!
Press in the V-belt (3) at position "A". The V-belt must give way
for approx. 8 mm (pressure: 10 kg).
!
Tighten the fastening screws.
!
After adjusting, check the V-belt.
!
Close the engine compartment cover.
Checking the coolant hoses
!
Open the engine compartment cover (page 107).
Inspect all hose connections on the engine and to the radiator or to the heater fan (cab version) for condition
(cracks, bulges, hard spots), tightness, and firm seating of the clamps. If necessary, have the hoses replaced by
trained personnel.
!
Close the engine compartment cover.
Replacing the coolant
!
Open the engine compartment and side cover (page 108).
!
Remove the radiator cap (1) by turning it anticlockwise.
Only carry out inspections when engine is cold, otherwise there is a risk of burns!
Drain only when engine is cold, otherwise there is a
risk of scalding!
Total cooling system capacity:
with canopy
2.7 L
with cab
2.9 L
3
2
1
2
STOP
1
STOP
Содержание KX 016-4
