Kubota K008-5, Руководство по эксплуатации

Страница: 92 / 168

90
W9215-8135-1
06/2021
Operation
Stopping on gradients
To securely park the excavator on gradients:

Lower the dozer onto the ground.

Dig the bucket as far as possible into the ground, or lower it
onto the ground.

Put the controls into neutral position.

Secure the excavator from moving using wedges (1).
Notes for rubber crawler operation

Driving or turning on sharp objects or over steps causes exces-
sive wear on the rubber crawlers and will lead to breaking of the
rubber crawler or cause the crawler running surface and the
steel inserts to be cut.

Make sure that no foreign objects get stuck in the rubber crawl-
er. Foreign objects lead to excessive crawler wear and can
cause it to break.

The crawler can become blocked due to too much dirt and sand. In this case, reverse the machine a short
distance in order to loosen dirt and sand.

Keep oil products away from the rubber crawlers.

Remove any fuel or hydraulic oil spilled on the rubber crawlers.
Making sharp turns

Do not make sharp turns on streets with a high-friction tarmac, e.g. concrete.
Protecting the crawler against salt

Do not work with the machine on the seashore. (The salt will cause the steel insert to corrode).
Danger due to moving excavator!
If the excavator is stopped on a slope, park it so that it
cannot move. Otherwise, there is a risk of being run
over due to the moving excavator.
STOP