Kubota CTL SVL97-2, Руководство оператора

Страница: 65 / 158

4. Turn the key to the [START] position and release
after the engine has started.
5. Check if all warning lights (except the hydraulic-
lock-indicator and the parking-brake-warning-light)
have gone out. If a warning light still be lit up, stop
the engine and then remove the key, and check for
the cause.
2. Checking the machine after
starting the engine
After starting the engine, but before starting operation
of the machine, check the machine conditions.
1. Idle the engine. (warm up)
The engine idle allows the engine lubricant to warm
up and penetrate every part of the engine.
2. Once the engine has warmed up, check the
following items.
• The engine-oil-pressure-indicator has gone out.
• The battery-charge-warning-light goes out when
engine speed is increased.
• The color of the exhaust is normal.
• You do not hear abnormal noises and do not
feel vibrations.
• No fluid is leaking from pipes or hoses.
3. If any following conditions occur, stop the engine
immediately.
• The engine rpm increases or decreases
suddenly.
• You hear abnormal noises suddenly.
• Exhaust is black.
• The engine-oil-pressure-indicator lights up
during operation of the machine.
IMPORTANT :
• If any preceding conditions occur, check the
machine and consult your local KUBOTA
dealer for service of the machine.
3. Starting the engine under cold
conditions
CAUTION
To avoid personal injury:
• Make sure that the armrests are in the raised
position during warm-up.
Start the engine in the following manner.
1. Turn the starter switch to the
[RUN] position (glow
position) and hold it until the glow-plug-indicator
has gone out.
2. Move the starter switch to the [START] position. to
crank and start the engine.
3. Release the starter switch after the engine has
started.
The starter switch will automatically return to the
[RUN] position.
IMPORTANT :
• Let the engine warm up after start-up for
approx. 10 minutes under no load conditions. If
the hydraulic-fluid-temperature is too low, it will
affect the operations or the function of the
pressure sensors.
Do not operate the machine under full load
before the engine has thoroughly warmed up.
• DEF (AdBlue) freezes at temperatures below
-11
℃
(12
℉
). Even if it is frozen, the engine is
not affected at its start-up and running.
STOPPING THE ENGINE
WARNING
To avoid personal injury or death:
• Lower the bucket or attachments to avoid a
person accidentally touching levers and
causing a serious accident.
• Place the machine on the flat ground.
1. After slowing the engine to idle, wait 3 to 5 minutes
for turbo to slow down and then turn the key to
[STOP] position.
2. Remove the key.
IMPORTANT :
• Do not stop the engine by shutting down the
battery power directly.
Doing so may cause failure or malfunction.
• Do not remove the battery terminal until the
SCR system stops. This is to prevent
damage to the system device.
• Do not refill with DEF (AdBlue) before the
SCR system stops. Otherwise, DEF (AdBlue)
may overflow from the breather hose of the
DEF (AdBlue) tank.
NOTE :
• After stopping the engine, the SCR system
automatically operates for up to about 25
minutes and returns the DEF (AdBlue) in the
piping to the DEF tank to prevent freezing
and clogging.
• The SCR system may generate operating
noise after the engine has stopped, but this
is not a malfunction.
OPERATION OF THE ENGINE OPERATION
SVL97-2
59