Kubota CTL SVL97-2, Руководство оператора

Страница: 37 / 158

6. Bucket-floating indicator
While in the bucket-float mode, the mark on the
instrument panel stays on.
(1) Bucket-float switch (2) Bucket-floating indicator
7. Master warning light
The master-warning-light is used to indicate broken
wire, short-circuit, and other problems.
The master-warning-light lights up to warn you of a
detection of broken or short-circuited hydraulic-lock-
solenoid (or hydraulic-unlock-solenoid), AUX-port-
variable-switch, and other elements.
IMPORTANT :
• If the master-warning-light lights up, consult
your local KUBOTA dealer immediately.
(1) Master warning light
8. Engine oil pressure indicator
The engine-oil-pressure-indicator lights up due to
failure of the lubricating system with the engine
running.
When the starter key is turned in
[RUN] position with
the engine off, the engine-oil-pressure-indicator lights
up.
When the engine starts, the engine-oil-pressure-
indicator goes out.
If the engine-oil-pressure-indicator stays on with the
engine running, stop the engine and check the engine
oil level.
(1) Engine oil pressure indicator
9. Battery charge warning light
The battery-charge-warning-light lights up if the
charging system fails with the engine running.
When the starter key is turned in
[RUN] position with
the engine off, the battery-charge-warning-light lights
up.
When the engine starts, the battery-charge-warning-
light goes out.
If the battery-charge-warning-light stays on with the
engine running, stop the engine and check the V-belt.
INSTRUMENT PANEL INSTRUMENT PANEL AND SWITCH
SVL97-2
31