Kubota BX1880 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 114

background image

1. Operator's seat

WARNING

To avoid personal injury or death:

• Adjust the operator's seat only while the tractor

is stopped.

• Make sure that the operator's seat is completely

secured after each adjustment.

• Do not allow any person other than the operator

to ride on the tractor.

[BX1880]

[BX2380 and BX2680]

(1) Seat
(2) Position adjust lever
(3) Backrest tilt adjust lever
(4) Armrest
(5) Seat belt

(A) Pull up
(B) Pull
(C) 100 deg.
(D) 130 deg.

Travel adjustment

Pull up the position-adjust-lever and slide the operator's
seat backward or forward, as required. The operator's
seat will lock in position when the position-adjust-lever
is released.

Tilt adjustment [BX2380 and BX2680]

Pull the backrest-tilt-adjust-lever and tilt the backrest to
the desired position.

Armrest [BX2380 and BX2680]

When operating the hydraulic-control-lever, open the
armrest RH up to 130 deg. This will prevent your elbow
from hitting the armrest RH.

IMPORTANT :

• After adjusting the operator's seat, be sure to

check that the operator's seat is properly
locked.

• Be sure that the operator's seat is out of

contact with the top link.

2. Seat belt

WARNING

To avoid serious injury or death:

• Always use the seat belt when the ROPS is

installed.

• Do not use the seat belt if the tractor is not

equipped with ROPS.

Adjust the seat belt for proper fit and connect it to the
buckle. The seat belt is auto-locking retractable type.

(1) Seat belt

3. Brake pedal and parking brake

lock pedal

WARNING

To avoid serious injury or death:

• Do not brake suddenly.

An accident may occur as a result of a heavy
towed load shifting forward or loss of control.

• To avoid skidding and loss of steering control

when driving on icy, wet, or loose surfaces,
make sure that the tractor is correctly ballasted,
operated at reduced speed, and operated with
the front-wheel drive engaged if equipped.

• The braking characteristics are different

between 2-wheel drive and 4-wheel drive. Know
the difference between 2-wheel drive and 4-
wheel drive and use them carefully.

FOOT CONTROLS AND HAND CONTROLS

INSTRUMENT PANEL AND CONTROLS

BX1880,BX2380,BX2680

33

«
...
35
36
37
38
39
...
»

Содержание BX1880



















































































































Отзывы:

Нет отзывов

Похожие инструкции для BX1880

Бренд: Winton Страницы: 20

Бренд: FarmTrack Страницы: 64

Бренд: Farmtrac Страницы: 88

Бренд: Baroness Страницы: 76

Бренд: Kellfri Страницы: 8

Бренд: GE Страницы: 2

Бренд: Komatsu Страницы: 6

Бренд: Sears Страницы: 56

Cropmaster VAK1 Series

Бренд: David Brown Страницы: 51

Бренд: Wheel Horse Страницы: 27

Бренд: Terramite Страницы: 128

Бренд: Summit Страницы: 93

Бренд: Peg-Perego Страницы: 11

Бренд: Iran Tractor Страницы: 106

Бренд: Iran Tractor Страницы: 118

Бренд: Iran Tractor Страницы: 122

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды