Kubota B2401DT, Руководство оператора

Страница: 75 / 95

[All models]
(1) Grease fitting (lift arm ball
joint)
[All models]
(1) Grease fitting (lower link ball
joint)
IMPORTANT :
• Grease up the ball joints and be sure to wipe off
excess grease later.
2. Checking engine start system
WARNING
To avoid personal injury or death:
• Do not allow anyone near the tractor while
testing.
• If the tractor does not pass the test, do not
operate the tractor.
• Detach an implement before testing.
Preparation before testing
1. Sit on operator's seat.
2. Set the parking brake and stop the engine.
3. Shift the main gear shift lever in
“NEUTRAL”
position.
4. Shift the PTO gear shift lever to “NEUTRAL”
position.
5. Fully depress the clutch pedal.
Test: switch for the main gear shift lever
1. Fully depress the clutch pedal.
2. Shift the main gear shift lever to
“Desired” position.
3. Turn the key to “START” position.
4. The engine must not crank.
Test: switch for the PTO gear shift lever
1. Fully depress the clutch pedal.
2. Shift the main gear shift lever to
“NEUTRAL”
position.
3. Shift the PTO gear shift lever to “ON” (engaged)
position.
4. Turn the key to “START” position.
5. The engine must not crank.
Test: switches for the operator's seat and the PTO
clutch lever
1. Sit on the operator's seat.
2. Start the engine.
3. Engage the PTO lever.
4. Stand up (do not get off the machine).
5. The engine must shut off after approximately 1
second (the buzzer sounds a warning).
6. If it does not stop, consult your local KUBOTA
Dealer for this service.
NOTE :
• If the engine cranks during any of these tests,
consult your local KUBOTA Dealer to have unit
checked before operating.
(1) Clutch pedal
(2) Main gear shift lever (3) PTO gear shift lever
(4) Operator's seat
3. Checking wheel bolt torque
WARNING
To avoid personal injury or death:
• Never operate tractor with a loose rim, wheel, or
axle.
• Any time bolts and nuts are loosened, retighten
to specified torque.
• Check all bolts and nuts frequently and keep
them tight.
EVERY 50 HOURS PERIODIC SERVICE
B2401DT, B2401DTWO, B2401DTN
69