Kubota B2401DT, Руководство оператора

Страница: 56 / 95

TIRES, WHEELS, AND BALLAST
TIRES
WARNING
To avoid personal injury or death:
• Do not attempt to mount a tire on a rim. This
should be done by a qualified person with the
proper equipment.
• Always maintain the correct tire pressure.
Do not inflate tires above the recommended
pressure shown in the operator's manual.
IMPORTANT :
• Do not use tires other than those approved by
KUBOTA.
1. Inflation pressure
Though the tire pressure is factory-set to the prescribed
level, it naturally drops slowly over the course of time.
Thus, check it regularly and inflate as necessary.
Tire sizes Inflation pressure
Rear
8-16, 4PR
160 kPa
(1.6 kgf/cm
2
)
[23 psi]
8.3-16, 6PR
150 kPa
(1.5 kgf/cm
2
)
[22 psi]
9.5-16, 4PR
140 kPa
(1.4 kgf/cm
2
)
[20 psi]
12-16.5, 4PR
270 kPa
(2.7 kgf/cm
2
)
[40 psi]
31 × 15.5-15, 4PR
140 kPa
(1.4 kgf/cm
2
)
[20 psi]
33 × 12.5-15, 4PR
140 kPa
(1.4 kgf/cm
2
)
[20 psi]
12-16.5 R14, 4PR
180 kPa
(1.8 kgf/cm
2
)
[25 psi]
Front
5-12, 4PR
240 kPa
(2.4 kgf/cm
2
)
[34 psi]
6-12, 4PR
200 kPa
(2.0 kgf/cm
2
)
[28 psi]
21 × 8.00-10, 4PR
160 kPa
(1.6 kgf/cm
2
)
[23 psi]
23 × 8.50-12 Turf,
4PR
150 kPa
(1.5 kgf/cm
2
)
[22 psi]
23 × 8.50-12 Ind.,
4PR
250 kPa
(2.5 kgf/cm
2
)
[35 psi]
23 × 8.50-12 R14,
6PR
234 kPa
(2.4 kgf/cm
2
)
[34 psi]
NOTE :
• Maintain the maximum recommended pressure
in the front tires, when using a front loader or
equipped with a full load of front weights.
2. Dual tires
Dual tires are not approved.
TIRES, WHEELS, AND BALLAST TIRES
50
B2401DT, B2401DTWO, B2401DTN