Kübler 573T, Руководство по эксплуатации

Страница: 5 / 76

R60726.0002 – Index 6b EN - page 5
1 Safety Instructions and Responsibility
1.1 General Safety Instructions
This operation manual is a significant component of the unit and includes important
rules and hints about the installation, function and usage. Non-observance can result in
damage and/or impairment of the functions to the unit or the machine or even in injury
to persons using the equipment!
Please read the following instructions carefully before operating the device and
observe all safety and warning instructions! Keep the manual for later use.
A pertinent qualification of the respective staff is a fundamental requirement in order to
use these manual. The unit must be installed, connected and put into operation by a
qualified electrician.
Liability exclusion: The manufacturer is not liable for personal injury and/or damage to
property and for consequential damage, due to incorrect handling, installation and
operation. Further claims, due to errors in the operation manual as well as
misinterpretations are excluded from liability.
In addition the manufacturer reserves the right to modify the hardware, software or
operation manual at any time and without prior notice. Therefore, there might be minor
differences between the unit and the descriptions in operation manual.
The raiser respectively positioner is exclusively responsible for the safety of the system
and equipment where the unit will be integrated.
During installation or maintenance all general and also all country- and application-
specific safety rules and standards must be observed.
If the device is used in processes, where a failure or faulty operation could damage the
system or injure persons, appropriate precautions to avoid such consequences must be
taken.
1.2 Use according to the intended purpose
The unit is intended exclusively for use in industrial machines, constructions and
systems. Non-conforming usage does not correspond to the provisions and lies within
the sole responsibility of the user. The manufacturer is not liable for damages which
have arisen through unsuitable and improper use. Please note that device may only be
installed in proper form and used in a technically perfect condition (in accordance to the
Technical Specifications). The device is not suitable for operation in explosion-proof
areas or areas which are excluded by the EN 61010-1 standard.