KTS-Electronic GmbH & Co. KG
– GPA 3000 DR
3
1 General guidelines
1.1 Preface
Congratulations on your purchase of one of the most advanced high performance
detectors: the GPA 3000 DR.
The GPA 3000 DR is the new development of KTS-Electronic GmbH & Co. KG.
Already pre-installed programs and an instruction manual which is furnished with
numerous illustrations and easy to understand will facilitate the assembly, so that
nothing will stand in the way for a practical application. Furthermore there is an
assembly instruction-video available on the tablet and an enclosed flash drive.
Besides the KTS 3D software the new "GPA Visualizer" software is pre-installed on
the tablet computer; this enables an easy operation without the need for previous
knowledge.
This instruction has been developed by KTS-Electronic GmbH & Co. KG. Any
alterations or duplications are only allowed with written permission of KTS-Electronic
GmbH & Co. KG. KTS-Electronic GmbH & Co. KG reserves the right to modify the
instruction with new knowledge at anytime. The new instructions can always be
downloaded gratuitously from our website.
1.2 Important details
Please note:
Stay away from conducting overhead lines
Do not use cell phone during operation
Do not process measurements during thunderstorms
Keep dry
Accurate operation is only guaranteed with a fully charged battery
For operation or charging only use the components enclosed or authorized by KTS GmbH
& Co. KG.
