KTS-Electronic GmbH & Co. KG
– GPA 3000 DR
18
Fig. 5.9 File management
5.3.3 Settings for KTS GPA 3D
The following settings can be adjusted by tapping on “SETTINGS”:
o
“Number of lanes”: Changes the number of lanes.
o
“Number of measurements”: Number of measurements in one lane.
o
“Language”: Selection between German, English and French. (Note: App
will restart after selecting a language).
o
“Reset Settings”: Resets the device to factory settings.
o
“Developer Settings”: Please do not change the developer settings
except for “Measure-delay”. Here you can change the time between two
measurements. Please note that this option will effect the speed options
“SLOW”, “NORMAL” and “FAST” under “MEASURE”.
Fig. 5.10 Settings
