NVT-E
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
42611 EN
9 of 27
4
Please observe protection
note ISO 16016.
Drawn:
2019-12-06 Pz/Bet
Replacing:
KTR-N dated 2019-02-14
Verified:
2019-12-06 Pz
Replaced by:
The different menu items are not displayed if the option is
not available.
Example: With a=0 the menu items for setting the
analogue output are not available. In this case
you may skip the description of these items.
The structure of the main menu filling level (
) and
temperature (
) are identical. These menus include
all settings for the switching outputs or the analogue outputs
(if available).
The basic settings of the device may be changed. General
settings are made in the menu
Basic settings extended
functions
(
). These settings should be made first, since
they affect displays and settings in the different menus.
General settings are, for example, the units used and the
assignment of the switching outputs for measurement of
filling level and temperature. The assignment of the
analogue outputs cannot be changed.
In addition the menu
Diagnostics
provides options of
diagnostics.
Illustration 4
A detailed explanation of the overall menu structure is shown at the end of these
operating/assembly instructions.
In the menu
Basic settings extended functions
(
) general basic settings are made. These settings affect the
display of values in the measuring display as well as the options of settings in the menus
filling
level
and
temperature
. It is possible to change the assignment of switching outputs for measurement of filling level and
temperature (if available) in this menu, too.
•
Press the button
to open the main menu.
•
Select the menu item
via the buttons
and
and open the menu via the button
.
▲▼
▲▼
Main menu level control
Level
oi l
▲▼
►
►
Main menu temperature
Temperature
t emp
►
►
►
▲▼
Settings for OUT X
Out X
out _
Settings for OUT X
Out X
out _
Settings for Analog 2
Analog Out2
An2
Device configuration
Configuration
o__i
▲
Measured values
Display
____
Settings for OUT1
Out 1
out 1
Exit submenu
Exit
E
Settings for Analog 1
Analog Out1
An1
Basic extended functions
Basic EF
b)EF
Exit submenu
Exit
E
Main menu diagnostics
Diagnostic
di A
Exit menu
Exit
E
Settings for OUTx
Out x
out _
▲▼
▲▼
If equipped
If equipped
▲▼
▲▼
▲▼
▲▼
If equipped
If equipped
If equipped
▲▼
4
Operation
4.5 Summary of menu
4.6 Amendment of basic settings
