NVT-E
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
42611 EN
5 of 27
4
Please observe protection
note ISO 16016.
Drawn:
2019-12-06 Pz/Bet
Replacing:
KTR-N dated 2019-02-14
Verified:
2019-12-06 Pz
Replaced by:
Please read through these operating/assembly instructions carefully before you assemble the level and
temperature control.
Please pay special attention to the safety instructions!
The operating/assembly instructions are part of your product. Please store them carefully and close to the level
and temperature control. The copyright for these operating/assembly instructions remains with KTR.
STOP
Warning of personal injury
This symbol indicates notes which may contribute to
preventing bodily injuries or serious bodily injuries that
may result in death.
!
Warning of product damages
This symbol indicates notes which may contribute to
preventing material or machine damage.
General advice
This symbol indicates notes which may contribute to
preventing adverse results or conditions.
STOP
With assembly and disassembly of the level and temperature control it has to be made sure
that the entire drive train is secured against accidental switch-on. You may be seriously hurt
by rotating parts. Please make absolutely sure to read through and observe the following
safety indications.
•
All operations on and with the NVT-E have to be performed taking into account "safety first".
•
Please make sure to switch off the power pack before you perform your work on the NVT-E.
•
Secure the power pack against accidental switch-on, e. g. by providing warning signs at the place of switch-on
or removing the fuse for current supply.
•
Do not reach into the operation area of the machine as long as it is in operation.
•
Please secure the rotating drive components against accidental contact. Please provide for the necessary
protection devices and covers.
You may only assemble and disassemble the NVT-E if you
•
have carefully read through the operating/assembly instructions and understood them
•
are technically qualified and specifically trained (e. g. safety, environment, logistics)
•
are authorized by your company
The NVT-E may only be used in accordance with the technical data (see chapter 1). Unauthorized modifications
on the NVT-E are not admissible. We will not assume liability for any damage that may arise. In the interest of
further development we reserve the right for technical modifications.
The
level and temperature control (NVT-E)
described in here corresponds to the technical status at the time of
printing of these operating/assembly instructions.
2
Advice
2.1 General advice
2.2 Safety and advice symbols
2.3 General hazard warnings
2.4 Intended use
