CLAMPEX
®
KTR 130 / KTR 131
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40829 EN
5 of 7
4
Please observe protection
note ISO 16016.
Drawn:
2016-12-22 Shg/Jh
Replacing:
KTR-N dated 2014-09-18
Verified:
2016-12-22 Shg
Replaced by:
The clamping sets are supplied in preserved condition and can be stored at a dry and covered place for 6 - 9
months.
!
Humid storage rooms are not suitable.
Please make sure that condensation is not generated.
!
In order to avoid any injuries and any kind of damage please always make use of proper
transport and lifting equipment.
The clamping sets are packed differently each depending on size, quantity and kind of transport. Unless other-
wise contractually agreed, packaging will follow the in-house packaging specifications of KTR.
Generally the clamping set is supplied in mounted condition. Before assembly the clamping set has to be inspect-
ed for completeness.
Component
Quantity
Description
1
1
Hexagon nut
2
1
Outer ring (slit)
3
1
Outer ring with counter hexagon bolt (slot)
4
1
Inner ring (slit)
Illustration 3: CLAMPEX
®
KTR 130
Illustration 4: CLAMPEX
®
KTR 131
Dirty or used clamping sets have to be disassembled and cleaned before assembly. After-
wards apply thin fluid oil lightly (e. g. Ballistol Universal oil or Klüber Quietsch-Ex).
3
Storage, transport and packaging
3.1 Storage
3.2 Transport and packaging
4
Assembly
4.1 Components of CLAMPEX
®
KTR 130 / KTR 131
