BoWex
®
Operating/Assembly instructions
KTR-N
Sheet:
Edition:
40110 EN
15 of 22
16
Please observe protection
note ISO 16016.
Drawn:
2019-07-01 Pz/Wb
Replacing:
KTR-N dated 2017-01-02
Verified:
2019-07-23 Pz
Replaced by:
Breakdowns
Causes
Hazard notes for
potentially explosive
atmospheres
Elimination
Excessive wear on
the spline of sleeve
ambient/contact
temperatures which
are too high for the
sleeve, max.
permissible
-30 °C/+100 °C
Danger of ignition due to
hot surfaces
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the nylon sleeve
3) Inspect coupling components and replace
coupling components that have been
damaged
4) Insert nylon sleeve, assemble coupling
components
5) Inspect alignment, adjust if necessary
6) Inspect and adjust ambient/contact
temperature
e. g. contact with
aggressive liquids/oils,
ozone influence, too
high/low ambient
temperatures etc.
causing a physical
modification of the
nylon sleeve
none
1) Set the unit out of operation
2) Disassemble the coupling and remove
remainders of the nylon sleeve
3) Inspect coupling components and replace
coupling components that have been
damaged
4) Insert nylon sleeve, assemble coupling
components
5) Inspect alignment, adjust if necessary
6) Make sure that further physical
modifications of the sleeve are excluded
!
If you operate with a worn sleeve (see chapter 9.3 and 9.4) a proper operation is not
ensured.
In respect of environmental protection we would ask you to dispose of the packaging or products on termination of
their service life in accordance with the legal regulations and standards that apply, respectively.
•
Metal
Any metal components have to be cleaned and disposed of by scrap metal.
•
Nylon materials
Nylon materials have to be collected and disposed of by a waste disposal company.
We recommend to store major spare parts on site to ensure the readiness for use of the machine in case if a
coupling fails.
Contact addresses of the KTR partners for spare parts and orders can be obtained from the KTR homepage at
www.ktr.com.
KTR does not assume any liability or warranty for the use of spare parts and accessories
which are not provided by KTR and for the damages which may incur as a result.
6
Breakdowns, causes and elimination
7
Disposal
8
Spares inventory, customer service addresses
