KTM SXF 350, Руководство пользователя

Страница: 37 / 102

SERVICE WORK ON THE CHASSIS
35
B00339-10
–
Loosen screws

. Take out the left fork leg.
–
Unscrew screws

. Take out the right fork leg.
10.8
Installing the fork legs
x
B00296-10
–
Position the fork legs.
Info
The topmost milled groove in the fork leg must be flush with the top edge of
the upper triple clamp.
Position bleeder screws

toward the front.
B00339-11
–
Tighten screws

.
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
–
Tighten screws

.
Guideline
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft)
B00300-11
–
Position the brake caliper. Mount and tighten screws

.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Position the brake line and clamp. Mount and tighten screws

.
–
Install the front wheel.
x
( p. 61)
10.9
Removing the fork protector
x
–
Remove the fork legs.
x
( p. 34)
B00306-10
–
Remove screws

on the left fork leg. Remove the fork protector from above.
–
Remove the screws on the right fork leg. Remove the fork protector from above.