KTM RC 390 Скачать руководство пользователя страница 50

Страница: 50 / 200

COMBINATION INSTRUMENT

Press the

SET

button

briefly.

Next display mode on the info display

7.14

Average fuel consumption 2/service menu

401467-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

The average fuel consumption 2 in km/L (or miles/L) and the distance to the next service
are displayed in this menu.

Info

The average fuel consumption 2 is displayed after several 100 meters of travel after
the ignition is switched on.
If the ignition was switched off for over 60 minutes, the display of the average fuel
consumption 2 is reset to 0.

Press the

SET

button

briefly.

Next display mode on the info display

Содержание RC 390









































































































































































































Результаты поиска

Содержание RC 390

Отзывы:

KTM RC 390, Руководство пользователя, Страница: 50 / 200

Результаты поиска

Содержание RC 390

Отзывы: