KTM RC 390 Скачать руководство пользователя страница 48

Страница: 48 / 200

COMBINATION INSTRUMENT

7.11

Riding time/average speed menu

401334-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

The riding time and average speed are displayed in this menu.

Info

If the ignition was switched off for over 60 minutes, the display is reset to 0.

Press the

SET

button

briefly.

Next display mode on the info display

7.12

Average speed/average fuel consumption 1 menu

401465-01

Condition
Alternative 1

• The ignition is on.
• The motorcycle is stationary.

Alternative 2

• The ignition is on.
• The motorcycle is moving.

–

Press the

SET

button briefly and repeatedly until the desired info display appears.

Содержание RC 390









































































































































































































Результаты поиска

Содержание RC 390

Отзывы:

KTM RC 390, Руководство пользователя, Страница: 48 / 200

Результаты поиска

Содержание RC 390

Отзывы: