KTM RC 390 Скачать руководство пользователя страница 12

Страница: 12 / 200

SAFETY ADVICE

2.3

Degrees of risk and symbols

Danger

Indicates a danger that will immediately and invariably lead to fatal or serious permanent injury if the appropriate measures are not
taken.

Warning

Indicates a danger that is likely to lead to fatal or serious injury if the appropriate measures are not taken.

Caution

Indicates a danger that may lead to minor injuries if the appropriate measures are not taken.

Note

Indicates a danger that will lead to considerable machine and material damage if the appropriate measures are not taken.

Warning

Indicates a danger that will lead to environmental damage if the appropriate measures are not taken.

2.4

Tampering warning

Tampering with the noise control system is prohibited. Federal law prohibits the following acts or the causing thereof:

1 The removal or rendering inoperative by any person other than for purposes of maintenance, repair, or replacement, of any device or

element of design incorporated into any new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate pur-
chaser or while it is in use, or

2 the use of the vehicle after such device or element of design has been removed or rendered inoperative by any person.

Among those acts presumed to constitute tampering are the acts listed below:

Содержание RC 390









































































































































































































Результаты поиска

Содержание RC 390

Отзывы:

KTM RC 390, Руководство пользователя, Страница: 12 / 200

Результаты поиска

Содержание RC 390

Отзывы: