KTM RC 390, Руководство пользователя

Страница: 119 / 200

14 WHEELS, TIRES
117
14.4 Installing the rear wheel
Warning
Danger of accidents Reduced braking efficiency due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
Warning
Danger of accidents No braking effect when operating the rear brake.
–
After installing the rear wheel, always operate the foot brake until the pressure point is reached.
Main work
–
Check the rear hub rubber dampers. ( p. 118)
L02151-10
–
Remove spacers

.
–
Check the wheel bearing for damage and wear.
» If the wheel bearing is damaged or worn:
–
Change the rear wheel bearing.
–
Clean and grease the shaft seal rings

and mating surfaces

of the spacers.
Long-life grease ( p. 187)
–
Insert the spacers.
–
Clean the thread of the wheel spindle and nut

.
–
Clean the fixing locations on the brake caliper support and swingarm.
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Push the rear wheel as far forward as possible and place the chain on the rear sprocket.