KTM RC 390 Скачать руководство пользователя страница 112 | Manualshive

Страница: 112 / 200

KTM RC 390 Скачать руководство пользователя страница 112

13

BRAKE SYSTEM

110

Note

Danger of accidents

Reduced braking efficiency caused by damaged brake discs.

–

If the brake linings are not changed in time, the steel brake lining carriers grind on the brake disc. The braking effect is greatly
reduced and the brake discs are destroyed. Check the brake linings regularly.

M00460-10

–

Check the brake linings for minimum thickness



.

Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the rear brake linings.

–

Check the brake linings for damage and cracking.
» If there is wear or tearing:

–

Change the rear brake linings.

13.9

Checking the free travel of foot brake lever

Warning

Danger of accidents

Brake system failure.

–

If there is no free travel on the foot brake lever, pressure builds up on the rear brake circuit. The rear brake can fail due to over-
heating. Adjust the free travel on foot brake lever according to specifications.

«
...
110
111
112
113
114
...
»

Содержание RC 390









































































































































































































Отзывы:

Нет отзывов