KTM RC 390 Скачать руководство пользователя страница 109

Страница: 109 / 200

BRAKE SYSTEM

107

M00457-11

–

Check the brake linings for minimum thickness



Minimum thickness



≥

1 mm (

≥

0.04 in)

» If the minimum thickness is less than specified:

–

Change the front brake linings.

–

Check the brake linings for damage and cracking.
» If there is wear or tearing:

–

Change the front brake linings.

13.6

Checking the rear brake fluid level

Warning

Danger of accidents

Failure of the brake system.

–

If the brake fluid level falls below the

MIN

mark, this indicates a leakage in the brake system or worn-out brake linings. Check

the brake system and do not continue riding. (Your authorized KTM workshop will be glad to help.)

Warning

Danger of accidents

Reduced braking efficiency due to old brake fluid.

–

Change the brake fluid of the front and rear brake according to the service schedule. (Your authorized KTM workshop will be
glad to help.)

Содержание RC 390









































































































































































































Результаты поиска

Содержание RC 390

Отзывы:

KTM RC 390, Руководство пользователя, Страница: 109 / 200

Результаты поиска

Содержание RC 390

Отзывы: