KTM RC 390 2020, Руководство пользователя, Страница: 230 / 263

22 TROUBLESHOOTING
228
Faults Possible cause Action
Engine overheats Foam formation in cooling sys-
tem
–
Drain the coolant. ( p. 201)
–
Fill/bleed the cooling system.
(
p. 203)
Thermostat defective
–
Check the thermostat.
Fuse 5 blown
–
Change the fuses of individual power
consumers. (
p. 180)
Defect in radiator fan system
–
Check the radiator fan system.
Malfunction indicator lamp
lights up red Malfunction in the electronic
fuel injection
–
Read out the fault memory using the
KTM diagnostics tool.
Engine dies during the trip Lack of fuel
–
Refuel. ( p. 102)
Fuse
1
,
3
,
4
, or
7
is blown
–
Change the fuses of individual power
consumers. (
p. 180)
The ABS warning lamp lights
up ABS fuse blown
–
Change the ABS fuses. ( p. 177)
Large difference in wheel
speeds of the front and rear
wheels
–
Stop the vehicle, switch off the igni-
tion, and start it again.
Malfunction in ABS
–
Read out the fault memory using the
KTM diagnostics tool.
High oil consumption Engine vent hose bent
–
Route the vent hose without bends or
change it if necessary.
Engine oil level too high
–
Check the engine oil level. ( p. 212)