KTM RC 125, Руководство пользователя

Страница: 64 / 211

9 RIDING INSTRUCTIONS
62
B00782-10
–
Unlock the steering. ( p. 27)
–
Sit on the vehicle, take the weight off of the side stand, and move up all the way.
–
Turn the emergency OFF switch to the position .
–
Switch on the ignition by turning the ignition key to the position .
After you switch on the ignition, you can hear the fuel pump working for about two
seconds. The function check of the combination instrument is run at the same
time.
–
Shift gear to neutral.
The green idling speed indicator lamp N lights up.
(RC 125)
The ABS warning lamp lights up and goes back out after starting off.
–
Press the electric starter button .
Info
Do not press the electric starter button until the combination instrument func-
tion check is finished.
When starting,
DO NOT open the throttle. If you open the throttle during the start-
ing procedure, fuel is not injected by the engine management system and the
engine cannot start.
Press the starter for a maximum of 5 seconds. Wait for a least 5 seconds before
trying again.
This motorcycle is equipped with a safety starting system. You can only start the
engine if the transmission is in neutral or if the clutch is pulled when a gear is
engaged. If the side stand is folded out and you shift into gear and release the
clutch, the engine stops.