background image

 

 

OPERATING 

INSTRUCTIONS 

 

DRIVE SYSTEMS 

English 

 

 

 

Congratulations! 

Congratulations on your decision to buy a product manufactured by KTM. We are sure that 
your new Pedelec will more than fulfil your expectations in function, design and quality, both 
now and in the future. 

All KTM Pedelecs are manufactured under the latest production methods and with high 

quality materials and are equipped with the best components according to their function. 

We would like you to read this guide carefully so that you can experience untroubled 

driving pleasure with your new Pedelec by KTM. 

Please make sure that your new Pedelec is handed over to you from KTM 
completely assembled, adjusted, and with all instructions. 

This manual is a supplement to the KTM Bike Pass. 

Should you have any questions after reading the manual, please contact your KTM dealer. 

Safety and Performance 

Please follow all national road laws and regulations.  

Make sure that frame size and controls are matched to your body height. 

Check before driving whether the brakes, lights and other safety-related components are 
functional and free of defects. 

Never drive without the lights on at night! 

Never carry a passenger on your bike (Exception: carrying a small child in a special child 
seat).  

Please note that the driving characteristics may change dramatically under load. 

Always wear a helmet! 

Page 1

Содержание Pedelec 2012

























Отзывы: